GROBAN BUYS!! GROBAN SELLS!! CALL GROBAN TODAY!! GROBAN'S GOT IT!!
We have an ever changing inventory of PUMPS of all types!!!
Several new surplus 200/100 gpm @ 50 psi fuel or oil pumps Dover/Blackmer 3"
2 speed motor, 3-1 reduction, Still in the crates!!!!
Hydraulic Pump & Valve for Log Splitter Cylinder
These are "new" government surplus Single-Stage, 2.5 gallons per minute (gpm) @ 3,600 rpm, 2500 psi pumps with built-in directional control valve for operating a double acting hydraulic cylinder. The control valve is an open center type with a spring centered lever. That means the pump blocks off the cylinder ports (extend - retract) and redirects the flow back to the source.
The pumps have a built in pressure relief valve set at 2,500 psi and requires 5 hp @ 3,600 rpm for maximum capacity. The pump operates Counter Clockwise (CCW) only, looking from the shaft end.
The inlet has a ¾-16 "O" ring port and the outlet and work ports have 9/16-20 "O" ring ports.
The unit has a four bolt flange mounting on a 3" square with 1-3/4" Pilot Diameter. The shaft is 5/8" diameter by 1-1/2" long. Overall Dim. 7-1/2"L x 3-3/4"W x 5-1/4"H.
This pump will get it done! The shipping weight is 11 lbs. - Your price is $120.00 each.
Sundyne Pump Model LMV-311 built for mid-air aircraft refueling, but may be used in many other
applications and we do have it
IN STOCK!!
SOLD OUT!
Sundyne Pump Model LMV-311 may be used in many other applications.
The unit
below is one incredible package - Pump - Reduction Gear Box - AC Motor!!
This is a virtually unused (only 3 Hours) Sundyne Centrifugal Pump Package comprised of a pump, gear box and motor. The pump is a Model LMV-311with an output of 245 GPM @ 1315 ft head, 0.6 sg, Hydro 2225 psig, 6986 RPM, S/N 14-67-052.
The unit has a Gear Box Model No. 417814 rated to 200 HP, Input 3550 RPM, Output 6986 RPM, S/N 98417814.
The motor is a Reliance Vertical Type P, 125 HP, 460 Volt, 444HPZ Frame, TEFC, SF 1.15, S/N 1MAN61967 G001 JA Tag 14P52. This unit was installed in 2001 and run-in only 3 hours.
We have just one of these complete units left and will give the freight cost when contacted by serious buyers with their zip code.
Your price (a real steal) at $12,525.00 plus shipping!
Webster Oil Burner Pump
This is a Two (2) Stage High Capacity Webster Oil Burner Pump (NSN 4320-00-001-6206). The pump turns at 3450 RPM and is rated 70 gal. per hour Inlet capacity, and 20 gal. per hour Outlet capacity. Additional nomenclature for the pump: L87R and 22R211DR5A3.
The pump has an adjustable relief valve that is rated 150 psi, but is factory set at 100 psi. It has two (2) filter sections, uses a Size 1 Gear, and has right hand rotation.
The unit has a two (2) bolt flange mounting and the shaft is 2-3/8" L x 7/16" Dia. with a flat. There are eight (paired) set screw indentations around the 2-5/32" Diameter x 3/4" L Pilot.
The pump has standard 1/4" pipe inlet and 1/8" pipe outlet ports.
Overall Dim. 6-3/4"L x 4-1/2"W x 5-11/16"H.
Price: $38.00 plus shipping
Hydraulic Pump & 6.5 HP 208-220 Volt AC 3 Phase Motor
This is one dynamic surplus 6.5 HP Electric Motor driven Hydraulic Pump built to military specifications (NSN 1420-01-282-9153). The Stratopower Piston Pump has a fixed displacement, .189 cu. inches per revolution and 2.9 gallons per minute at 3600 RPM.
The Pump is driven by a Reuland 6-1/2 HP electric motor, at 208 Volts (can operate on 220 volts) AC, 3 Phase, 50/60 Hz, 3000/3600 RPM, 5.4/6.5 HP, with a Totally Enclosed - Fan Cooled (TEFC) frame and a thermal protector.
The overall dimensions of the Unit are 20" Long x 13" High x 15-1/2" Wide.
This pump will be your "Strongest Link"!
The shipping weight of this solid unit is 118 lbs.
Your price is $295.00 each plus shipping.
24 Volt Scot Fuel Transfer Pump.
This is a new 24 volt 50 GPM @ 60 ft. head Fuel Transfer Pump with quick disconnect hose couplings. It is a complete kit mounted on a base with carrying handles. This pump is ideal for Airports, Marinas, Fire Departments, Fuel Transfer Vehicles, Tug Boats, Forestry Departments, Marine Fuel Depots, Heating Oil Transfer, Gas Station Emergency By-Pass/Back-up, or any application where fuel has to be transferred "quickly" and "safely".
The unit has an explosion-proof, 24 volt DC, 35 amp, 1.5 Hp motor operating at 3100 RPM; duty 30 min.
Included is the power cable (20 ft. long) which is a standard NATO slave cable.
The pump weighs 111 lbs., but with the attachments and shipping crate, shipping weight is 190 lbs. We'll give you the shipping cost when you contact us with your zip code.
Your price $475.00 plus shipping.
2" Bronze Marlow 7 hp Pump 120 gpm 160' Head
This is an incredibly powerful Marlow Pump with a 2" intake, 1-1/2" discharge, and four bolt flanged connections; Models # 1-1/2xSC, Spec. 0842A00 and Mo.#G 13853. The maximum head pressure is 160' at 120 GPM. The pump is powered by a 7 horsepower US Motors (rated continuous duty) 230 volts, 3 phase, 60 cycle, Drip-Proof motor, operating at 3540 rpm. Overall Dim: 24" L x 12" H x 15" W. Although it looks new, this pump was removed from operating equipment . "Please be sure that you have three phase current before you purchase the pump"! Shipping weight for one pump is 230 pounds and it will be shipped by truck. We will get the freight costs when contacted by buyers....and yes, we do have quantities available.
Your price $395.00 plus shipping.
ONLY ONE LEFT ! ! !
Peabody Barnes Portable Electric Submersible Dewatering Pump
This Peabody Barnes Model No. 21ASE-3, Portable Electric Submersible Dewatering Pump (Code 783) is driven by a 7-1/2 HP, 3450 RPM, 230/460 Volt,
19/9.5 Amps, 3 Phase, 60 Hz, AC Motor. The unit has an oil-filled motor, Ball Thrust Bearings, a Barcast Impeller, a Barcast Liner, and is especially suited
for use where space is limited. With a 4" output this pump is ideal for fast dewatering of manholes, casings, caissons, etc. The pump is a "submersible type"
rated at up to a 123 foot head and up to 307 gallons per minute (min. head 37'). It has a 12" O.D. case and will fit in a 13-1/2" pipe.
It is equipped with 50' of 10/4 SO Cable and plug. The Stainless Steel shaft is a 416SS Shaft. The pump housing is "high strength" aluminum with a 4" discharge port. It has a 45
degree elbow off of a 4 - bolt pad mount and a 4" male thread. We can email additional specifications to you.
The overalll dimensions: 12" W x 29" H. The weight of the pump is 156 lbs. without shipping materials. Crated dimensions are about 40" H x 18" W x !7" L and 172 lbs.
Price $1525.00 plus freight.
SOLD OUT ! ! !
Cummins 175HP Diesel or Natural Gas Fire Pump
This is one overwhelming used Cummins 175 HP Diesel driven Fire Pump which can operate on diesel or natural gas fuel. The diesel engine is a Model No. N H 220 - 1F (7-72) S.O. No. 35688 and engine Ser.#s 20281945 and 10288469 CPL 028. It is unique in that for Natural Gas operation, the engine is first started on Diesel Fuel and then switched over to natural gas operation with the govenor controlling the flow of natural gas.
The diesel engine has a closed cooling system which flows through the "A" section of the heat exchanger. Some of the raw water pumped by the pump is diverted through the "B" section of the heat exchanger, thereby cooling the water circulating in the engine's system. The engine operates at 1750 RPM on diesel or natural gas fuel and has a 24 volt starter. The engine has been turned over but not started.
The Colt Industries Pump is a 6", single stage, Fig. 5824 F Fire Pump. BHP at rated conditions is 119 max BHP 145. Rated conditions at 1500 GPM @ 100 PSI and 1700 RPM. Net pressure at shut-off, 111 PSI. Net pressure at 150% rated capacity, 70 PSI.
The pump has a 16" diameter impeller, ser. K2T 1068618 with a 6" outlet, 8" diameter flange, 8-1/2" inlet, with a 13-1/2" diameter flange.
Overall dimensions: Unit A - 112" long, by 37" wide by 66" high. Unit B - 112" long, by 37" wide by 76" high (vertical exhaust pipe still attached)
We will quote shipping cost upon receiving your location. Price $2795.00 plus freight.
12 Volt D.C. powered Hale Priming Pump $175.00 (OUT OF STOCK)- - - - - - One of many A.C. pumps
We carry a variety of pumps for many applications, steel, bronze and others.
Pumps for oil, water, chemicals or whatever you may need, Call us!!
Military 12 Volt Pump for Fuel Oil 90 psi New
This is a high pressure gear type pump manufactured by Globe Motors, with an adjustable pressure relief valve and 1/8" pipe thread inlet and outlet. The pump barrel is approximately 1-5/8" in diameter. The number on the pump is H9146.
It has a 2 pin electrical connector for grounded or ungrounded electrical systems and is rated 2.75 gph @ 60 PSI @ 10VDC and 3 gph @ 90 PSI @ 14VDC. Yes, it is three (3) gallons per hour - "not" three (3) gallon per minute which would equate to 180 gallons per hour.
(If your house or motor vehicle needs 180 gallons per hour, then it needs a tune-up whereupon this would be the pump for you).
The pump also has an adjustable pressure relief valve that allows you to control the max pressure.
The pump may also be used as a pre-lube pump on diesel engines, a primer pump, or an oil burner pump.
We will email ordering info for the pump's electrical connector to purchasers upon request.
The shipping weight is 2 lbs. Your price $39.50 plus shipping.
New Duplex Pressure Car Washer Pump
Need To Get The Dirt Off This Fall?
Well this Duplex Pressure Car Washer Pump will do the cleaning for you; dirt just can't hang on. This new high quality Japanese made two cylinder pump made by Arimitsu does the job! It is rated at 700 psi. 3.3 gpm @ 1,725 rpm when powered with your 1-1/2hp motor turning counter-clockwise (CCW).
The cylinders are brass with forged brass cylinder heads, horizontal oil bath aluminum alloy crankcase with 1/2" & 3/8" NPT inlet ports and 1/8", 1/4" and 3/8" NPT outlet ports.
It has an internal taper shaft for direct connection to an electric motor with a tapered shaft, but also comes with an adapter to connect directly to a regular (straight) 5/8" keyed shaft.
The shipping weight is 10 lbs.
The price is $59.00 plus shipping. Print out the spec sheet to read the numbers1
Jabsco Brass Self Priming Water Pump /wPulley
This is a great fresh or raw water Jabsco Pump Model No. 1673-001 rated at 13 GPM @ 2100 Rpm, 4.3 PSI, when connected to "your" 1/3 hp motor, and to 6.7 GPM @ 2100 RPM, 21.6 PSI, when connected to "your" 1/2 hp motor. Minimum operating speed: 100 RPM.
The pump has a bronze body and a keyed 5/8" stainles steel shaft, a neoprene impeller, a 1/2" pipe thread inlet port and a 1/2" pipe thread outlet port. A 4" Dia. Pulley for a 1/2" wide cog belt comes with each pump, also a Thermal Sensor on the back with two leads for a remote water temperature indicator. Maximum suction lift is 22 feet when wetted.
Overall size is 4-7/8"L x 4" H x 7" W with the fitting and 4" x4" x 4" without the fitting. This pump is ideal for marine, farm, industrial, and home plumbing applications.
The shipping weight is 7 lbs. Hurry, buy before the monsoon!!! The price is $89.50 each plus shipping.
Pump /w 1-1/2 HP 575 Volt AC Electric Motor
This unit is manufactured by AEC. The pump is a Scott Model #2015H0SB. The construction is: AB, Impeller: 4.63, Seal: .62. The seal construction: EPT-NR.
The Pump is driven by a Century 1-1/2 HP, 3450 RPM, 3 Phase, 60 Hz, 1.6 amp, 575 Volt, AC motor. The 575 volts is common in Upper New York State and Eastern Canada.
The motor is rated SF: 1.75, Form KXA, Insulation Class: B, Catalog No. H593. It has a 56C TEFC (totally enclosed - fan cooled) frame. This pump will not be your "Weakest Link"!
The shipping weight ranges from 44 to 50 lbs depending on packaging and minor unit differences.
The price is $115.00 plus shipping.
Sandpiper Air Powered Pump (OUT OF STOCK)
This is an incredibly powerful Sandpiper Air Powered Pump Model # EB2-B, Type TB-1-A, Ser. 232377.
This "Double Diaphram" Air Powered pump can move a large volume of liquids for you. Optionally, you can intake water via the built in "Frame Screen" or knock out a section of the screen and connect a 2" pipe. The output pipe is also 2" STD.
This pump was removed from operating equipment and looks new.
The pump is 22" H x 19" W x 12" Deep.
We will get the freight cost when contacted by buyers. The price is $395.00 plus shipping.
SOLD OUT!
Weinman Centrifugal Pump
This is a rebuilt Weinman Centrifugal Pump Model 4K4AP that can produce 800 GPM at 120 ft. head, and 600 GPM at 133 ft. head. It has a 5" Inlet and a 4" Outlet, with a 1-3/8" Dia keyed shaft. One pump is blue the other is white. The pump will be driven by your (up to) 40 HP motor. Shipping weight has not yet been determined.
Your price each $495.00 plus shipping.
HOME ~~ BLOWERS and FANS ~~ ELECTRICAL EQUIPMENT ~~ GENERATORS ~~ HYDRAULICS ~~ MILITARY EQUIPMENT
MISCELLANEOUS EQUIPMENT
~~ NSN INVENTORY ~~ SPECIALS ~~
REQUESTED PHOTOS
WANT TO BUY ~~ ONLINE CATALOG
